
Built for forklifts, chemicals and heavy traffic
Industrial Floor Coatings on Florida’s Treasure Coast
Crown Surface Systems coats warehouse, workshop and other industrial floors across Florida’s Treasure Coast, from our base in Stuart. We install high-performance Flexmar NextGen polyaspartic coatings built to withstand forklifts, chemicals, heavy traffic and constant use, over concrete we diamond grind and repair first.
Industrial spaces
Made for working floors
Warehouses and distribution
Forklifts and pallet jacks all day long. A coated floor seals the slab and is easier to sweep than bare concrete.
Workshops and maintenance shops
Oil, fluids and dropped tools. The topcoat is chemical and scratch resistant, so spills wipe up instead of soaking in.
Production floors
Constant traffic and constant use. We plan the work with you so the floor is out of service for as little time as possible.
Storage and loading areas
Heavy loads and doors open to the weather. The UV-stable topcoat holds its color where the sun reaches it.
For shops, showrooms and offices, see commercial floor coatings. Have a different kind of space? Tell us about it when you request an estimate.
What the floor has to handle
Forklifts and heavy traffic
Our commercial and industrial coatings are built to withstand forklifts, heavy traffic and constant use. Tell us what runs on your floor, and we’ll go over it with you on site at the estimate.
Spills and chemicals
The clear topcoat is chemical resistant, so oil and other spills clean up from the surface instead of soaking into the concrete.
Dust and wear
Bare concrete wears and dusts under traffic. A coated floor seals the slab, so it’s easier to sweep and keep clean.
Before any coating
Prep that holds up under load
A coating is only as good as its bond. Every Crown install starts with diamond grinding, which takes off old coatings, paint and surface stains and opens up the concrete so the basecoat can bond.
Cracks and low spots get repaired first, and our grinders run with dust extractors to keep the dust down.

The process
How it’s installed
- 1
Free estimate
We visit, look at the floor, measure the space and help you pick a finish, then give you a price. No pressure and no obligation.
- 2
Prep
Diamond grinding opens up the concrete and takes off old coatings, paint and surface stains. Cracks and low spots get repaired.
- 3
Coat
A basecoat that soaks into the concrete for a lasting bond, then the decorative flake, then a high-gloss, scratch-resistant clear topcoat.
- 4
Back in service
Polyaspartic cures in hours. We tell you at the estimate when people and equipment can go back on the floor.
Every floor is the Flexmar NextGen polyaspartic system, and Crown Surface Systems is a certified Flexmar installer. We’re part of the Crown family of companies, a sister company to Jensen Beach Aluminum & Windows.
What it costs
The price depends on the size of the floor, the shape the concrete is in and the finish you pick. The estimate is free: we look at the floor, measure, show you finishes and give you a price, with no pressure and no obligation.
Where we work
From Stuart we cover Stuart and Martin County, Port St. Lucie, Jupiter and Palm Beach Gardens, and the rest of the Treasure Coast. Not sure we cover your street? Put your zip code in the estimate form and we’ll tell you.
FAQ
Common questions
Can a coated floor handle forklifts?
Yes. Our commercial and industrial coatings are built to withstand forklifts, heavy traffic and constant use. Tell us what runs on your floor at the estimate.
Is the coating chemical resistant?
Yes. The clear topcoat is chemical and scratch resistant, so spills clean up from the surface instead of soaking into the concrete.
How long does an industrial floor take?
It depends on the size of the floor and the shape the concrete is in. Polyaspartic cures in hours, where many epoxy systems need a day or more between coats, and we plan the schedule with you at the estimate.
Can you coat concrete with old coatings, oil stains or cracks?
Yes. Every install starts with diamond grinding, which takes off old coatings, paint and surface stains, and we repair cracks and uneven spots before any coating goes down.
Will the install smell?
The system we use is zero VOC and low odor during the install.
Do you also coat shops and showrooms?
Is the estimate free?
Yes. We visit, look at the floor, measure the space and show you finishes, then give you a price. No pressure and no obligation.
Get a free estimate
Tell us about your warehouse, shop or industrial floor and we’ll set up a time to measure and show you colors. We’re open Monday to Friday, 8 AM to 5 PM, or email info@crownsurfacesystems.com.